Màn hình proface PS3711A-T42-24

PS3711A-T42-24

Digital Electronics Corporation

12 Tháng

Nhà phân phối tại Việt Nam

Display Type
TFT Color LCD
Display Size
15"
Resolution
1,024 x 768 pixels (XGA)
Dot pitch
W0.297 x H0.297 mm [W0.01 x H0.01 in.]
Effective Display Area
W304.1 x H228.1 mm [W11.97 x H8.98 in.]
Display Colors
262,144 Colors
Backlight
When PS-A Revision 5 and later:
LED (When replacement is required,contact your local GP distributor)
When PS-A Revision 5 and earlier:
CCFL (Replaceable)*1
Brightness Control
4 Levels (Adjusted with the software)
Backlight Service Life
50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink)
Supported OS
Windows® 2000/Windows® XP/Windows® XP Embedded
CPU
ULV Intel® Celeron® M 1.0 GHz
L2 Cache Memory
512 KB (Built in the CPU)
Main Memory
DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot)
Chipset
Intel® 855GME + ICH4
Graphics Accelerator
Built in Intel® 855GME
Video Memory
64 MB or less (When using Windows®) UMA Type
Graphics
XGA (1,024 x 768 pixels)
BIOS
Phoenix® First BIOS Embedded Pro
Clock Accuracy
±180 sec. /month (deviation at room temperature and power is OFF)*2
Touch Panel Type
Resistive Film (analog)
Touch Panel Resolution
1,024 X 1,024
Touch Panel Service Life
1,000,000 times or more, Sweeping 100,000 times or more
Touch Panel Interface
Internal USB
IDE
2.5" HDD or SSD x 1 (Master), CF Card Slot (Type I/II) x 1 (Slave)*3
Serial (COM1)
RS-232C (RI/+5 V switch possible), Connector: D-Sub9 (plug)
Serial (COM2)
RS-232C (RS-232C/422/485 switch possible), Connector: D-Sub9 (plug)
Ethernet (LAN1)
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
Ethernet (LAN2)
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*4
USB (TYPE-A)
Conforms to USB2.0 (TYPE-A) x 5, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
Keyboard
PS/2 Connector: mini DIN 6 pin
RAS
Input: 4 points, Output: 4 points , Rated voltage: DC 24 V , Maximum rated current: 100 mA , External reset input: 1 point, Input voltage: DC 12 to 24 V, Connector: D-Sub25 (plug) x 1
Sound
Speaker output, connector: mini-pin jack
PCMCIA
PC Card Slot, Card Bus supported connector (*except for Zoomed Video, Sound features): Type II X 1, Type III X 2

1About the differences in a CCFL model and a LED model.

2Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

3Can be switched between Master and Slave via the settings.

4Wake On LAN supported.

General Specifications

International Safety Standards
Rated Input Voltage
DC 24V
Input Voltage Limits
DC 19.2 to 28.8V
Allowable Voltage Drop
5 ms or less
Power Consumption
90 W or less
Voltage Endurance
AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance
DC 500 V, 10 MΩ or more (between charging and FG terminals)
Weight Approx.
6 kg [13.2 lb] or less (display unit only)
External Dimensions
W395 x H294 x D60 mm [W15.55 x H11.57 x D2.36 in.]
Panel Cut Dimensions
W383.5 x H282.5 mm [W15.1 x H11.12 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*6

5The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the GP and separate protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the GP be sure to confirm the type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

6Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].

Bình luận

Sản phẩm cùng loại

Màn hình proface PS3450A-T41 Call

Màn hình proface PS3450A-T41

Hotline: 0946.733.151
Màn hình proface PS3650A-T42 Call

Màn hình proface PS3650A-T42

Hotline: 0946.733.151
Màn hình proface PS3651A-T42-24V Call

Màn hình proface PS3651A-T42-24V

Hotline: 0946.733.151
Màn hình proface PS3710A-T42-24V Call

Màn hình proface PS3710A-T42-24V

Hotline: 0946.733.151
Màn hình proface PS3711A-T42 Call

Màn hình proface PS3711A-T42

Hotline: 0946.733.151
Màn hình proface PS3651A-T42 Call

Màn hình proface PS3651A-T42

Hotline: 0946.733.151
Màn hình PS3000-BA Call

Màn hình PS3000-BA

Hotline: 0946.733.151
Màn hình PS3001-BD Call

Màn hình PS3001-BD

Hotline: 0946.733.151
Màn hình proface PS3450A-T41-24V Call

Màn hình proface PS3450A-T41-24V

Hotline: 0946.733.151
Màn hình proface PS3451A-T41-24V Call

Màn hình proface PS3451A-T41-24V

Hotline: 0946.733.151
Màn hình proface PS3710A-T42 Call

Màn hình proface PS3710A-T42

Hotline: 0946.733.151

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

Thống kê

  • Đang online 79
  • Hôm nay 164
  • Hôm qua 2,137
  • Trong tuần 8,328
  • Trong tháng 17,235
  • Tổng cộng 895,223

Top

   (0)