Màn hình proface PS3650A-T42-24V

(1 đánh giá)


Digital Electronics Corporation

12 Tháng

Nhà phân phối tại Việt Nam

Display Type
Display Size
1,024 x 768 pixels (XGA)
Dot pitch
W0.24 x H0.24 mm [W0.01 x H0.01 in.]
Effective Display Area
W245.76 x H184.32 mm [W9.68 x H7.26 in.]
Display Colors
262,144 Colors
CCFL (Replaceable)
Brightness Control
4 Levels (Adjusted with the software)
Contrast Control
Not applicable
Backlight Service Life
60,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink)
Supported OS
Windows® XP/Windows® XP Embedded
Intel® Celeron® M 1.5 GHz
L2 Cache Memory
1 MB (Built in the CPU)
Main Memory
DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot)
Intel® 855GME + ICH4
Graphics Accelerator
Built in Intel® 855GME
Video Memory
64 MB or less (When using Windows®) UMA Type
XGA (1,024 x 768 pixels)
Phoenix® First BIOS Embedded Pro
Clock Accuracy
±180 sec. /month (deviation at room temperature and power is OFF)*1
Touch Panel Type
Resistive Film (analog)
Touch Panel Resolution
1,024 X 1,024
Touch Panel Service Life
1,000,000 times or more
Serial ATA
Serial ATA Rev. 1.0a x 1, 2.5" HDD Unit
CF Card Slot (Type I/II) x 1 (Master or Slave)*2
Serial (COM1)
RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug)
Ethernet (LAN1)
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
Ethernet (LAN2)
IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*3
Conforms to USB1.1 (TYPE-A) x 1, Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
Input (external reset input possible): 2 points, Output 2 points, Rated Voltage: DC 12 V, Maximum Rated Current: 100 mA, Connector: D-Sub9 (socket) x 1
Speaker output, connector: mini-pin jack
PC Card Slot, Card Bus supported connector (except for Zoomed Video, Sound features): Type II x 1

1Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

2Can be switched between Master and Slave via the settings.

3Wake On LAN supported.

General Specifications

International Safety Standards
Rated Input Voltage
DC 24V
Input Voltage Limits
DC 19.2 to 28.8V
Allowable Voltage Drop
5 ms or less
Power Consumption
80 W or less
In-Rush Current
30 A or less
Voltage Endurance
AC 1,000 V, 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance
DC 500 V, 10 MΩ or more (between charging and FG terminals)
Weight Approx.
4.5 kg [9.9 lb] or less (display unit only)
External Dimensions
W313 x H239 x D103 mm [W12.32 x H9.41 x D4.06 in.]
Panel Cut Dimensions
W301.5 x H227.5 mm [W11.87 x H8.96 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*5

4The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.

5Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

Màn hình APL3000-BA Call

Màn hình APL3000-BA

Hotline: 0946.733.151
Màn hình proface PL3900-TA Call

Màn hình proface PL3900-TA

Hotline: 0946.733.151
Màn hình proface PL3700-KD Call

Màn hình proface PL3700-KD

Hotline: 0946.733.151
Màn hình proface APL3600-TA Call

Màn hình proface APL3600-TA

Hotline: 0946.733.151
Màn hình proface APL3600-KD Call

Màn hình proface APL3600-KD

Hotline: 0946.733.151
Màn hình proface APL3600-KA Call

Màn hình proface APL3600-KA

Hotline: 0946.733.151
Màn hình proface APL3600-TD Call

Màn hình proface APL3600-TD

Hotline: 0946.733.151
Màn hình APL3000-BD Call

Màn hình APL3000-BD

Hotline: 0946.733.151
Màn hình proface PL3700-KA Call

Màn hình proface PL3700-KA

Hotline: 0946.733.151
Màn hình proface PL3700-TD Call

Màn hình proface PL3700-TD

Hotline: 0946.733.151
Màn hình proface PL3900-TD Call

Màn hình proface PL3900-TD

Hotline: 0946.733.151
Màn hình proface PL3700-TA Call

Màn hình proface PL3700-TA

Hotline: 0946.733.151

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

MR. Bình

MR. Bình - 0903.733.151

Liên kết website

Thống kê

  • Đang online 19
  • Hôm nay 453
  • Hôm qua 665
  • Trong tuần 1,118
  • Trong tháng 22,153
  • Tổng cộng 2,019,669