Màn hình proface PS3450A-T41

Name: Màn hình proface PS3450A-T41
Brand: Digital Electronics Corporation

Mã sản phẩm : PS3450A-T41

Xuất xứ : Digital Electronics Corporation

Bảo hành : 12 Tháng

Nhà phân phối tại Việt Nam

Chi tiết

Display Type	TFT Color LCD
Display Size	8.4"
Resolution	800 x 600 pixels (SVGA)
Dot pitch	W0.213 x H0.213 mm [W0.01 x H0.01 in.]
Effective Display Area	172.4 x 129.8 mm [W6.79 x H5.11 in.]
Display Colors	262,144 Colors
Backlight	CCFL (User nonreplaceable parts. Factory replacement required.)
Brightness Control	4 Levels (Adjusted with the software)
Backlight Service Life	50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink)
Supported OS	Windows® 2000/Windows® XP/Windows® XP Embedded
CPU	ULV Intel® Celeron® M 1.0 GHz
Main Memory	DDR SDRAM (PC2700), 256 MB/512 MB/1 GB (SO-DIMM socket x 1 slot)
Chipset	Intel® 855GME + ICH4
Graphics Accelerator	Built in Intel® 855GME
Video Memory	64 MB or less (When using Windows®) UMA Type
Graphics	SVGA (800 x 600 pixels)
BIOS	Phoenix® First BIOS Embedded Pro
Clock Accuracy	±180 sec. /month (deviation at room temperature and power is OFF)*1
Touch Panel Type	Resistive Film (analog)
Touch Panel Resolution	1,024 X 1,024
Touch Panel Service Life	1,000,000 times or more, Sweeping 100,000 times or more
Touch Panel Interface	Internal USB
IDE	2.5" HDD X 1 (Primary Master), CF Card Slot (Type I/II) X 2 (Primary Slave and Secondary Master)
Serial (COM1)	RS-232C, Connector: D-Sub9 (plug)
Serial (COM2)	RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug)
Ethernet (LAN1)	IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
Ethernet (LAN2)	IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1*2
USB (TYPE-A)	Conforms to USB2.0 (TYPE-A) x 4, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
Sound	Speaker output, connector: mini-pin jack

1Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

2Wake On LAN supported.

General Specifications

International Safety Standards
Rated Input Voltage	AC 100 to 240V
Input Voltage Limits	AC 85 to 264V
Rated Frequency	50/60 Hz
Allowable Voltage Drop	1 cycle or less(Voltage drop interval must be 1 second or more.)
Power Consumption	120 VA or less
In-Rush Current	AC 100 V, 30 A or less, AC 240 V, 50 A or less
Voltage Endurance	AC 1,500 V 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance	DC 500 V, 10 MΩ or more (between charging and FG terminals)
Weight Approx.	4 kg [8.8 lb] or less (display unit only)
External Dimensions	W230 x H177 x D65 mm [W9.06 x H6.97 x 4.72 in.]
Panel Cut Dimensions	W218.5 x H165.5 mm [W8.6 x H6.52 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*4

3The front face of the GP unit, installed in a solid panel, has been tested using, conditions equivalent to the standards shown in the specification. Even though the, GP unit's level of resistance is equivalent to these standards, oils that should have, no effect on the GP can possibly harm the unit. This can occur in areas where either, vaporized oils are present, or where low viscosity cutting oils are allowed to adhere, to the unit for long periods of time. If the GP's front face protection sheet becomes, peeled off, these conditions can lead to the ingress of oil into the GP and separate, protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the, front panel’s plastic cover. Therefore, prior to installing the GP be sure to confirm the, type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket, are removed from the panel, the original level of the protection cannot be guaranteed., To maintain the original protection level, be sure to replace the installation gasket, regularly.

4Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].