Màn hình proface PL3700-TA

Mã sản phẩm : PL3700-TA

Xuất xứ : Digital Electronics Corporation

Bảo hành : 12 Tháng

Nhà phân phối tại Việt Nam

Chi tiết

Display Type	TFT Color LCD
Display Size	15"
Resolution	1,024 x 768 pixels (XGA)
Dot pitch	W0.297 x H0.297 mm [W0.01 x H0.01 in.]
Effective Display Area	W306.2 x H230.1 mm [W12.06 x H9.06 in.]
Display Colors	262,144 Colors
Backlight	When Rev.5 is marked: LED backlight (The backlight cannot be replaced by the user. The unit must be sent back for backlight replacement.), When Rev.5 is NOT marked: CCFL (The backlight can be replaced by the user.)*1
Brightness Control	4 Levels (Adjusted with the software)
Contrast Control	Not applicable
Backlight Service Life	50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink)
Supported OS	Windows® 2000/Windows® XP/Windows® XP Embedded
CPU	Intel® Core™ Duo 2.0 GHz/Celeron® M 440 1.86 GHz
L2 Cache Memory	Intel® Core™ Duo 2.0 GHz 2 MB/Celeron® M 440 1.86 GHz 1 MB (Built in the CPU)
Main Memory	DDR2 SDRAM (PC4200), 512 MB/1 GB/2 GB (SO-DIMM socket x 2 slots)*2
Chipset	Intel® 945GME + ICH7M
Graphics Accelerator	Built in Intel® 945GME
Video Memory	64 MB or less (When using Windows®) UMA Type
Graphics	SXGA (1,280 x 1,024 pixels)
BIOS	Phoenix® TrustedCore™ BIOS
Clock Accuracy	±180 sec/month (deviation at room temperature and power is OFF)*3
Touch Panel Type	Resistive Film (analog)
Touch Panel Resolution	1,024 x 1,024
Touch Panel Service Life	1,000,000 times or more, Sweeping 100,000 times or more
Touch Panel Interface	Internal USB
Serial ATA	Serial ATA Rev. 1.0a x 2, 2.5" HDD Unit or SSD Unit
IDE	Master: CF Card Slot (Type I/II compatible) x 1, Slave: DVD Drive x 1
Serial (COM1)	RS-232C (RS-232C/422/485 switch possible, RI/+5 V switch possible), Connector: D-Sub9 (plug)
Serial (COM2)	RS-232C (RI/+5 V switch possible), Connector: D-Sub9 (plug)
Serial (COM3)	RS-232C, Connector: D-Sub9 (plug)
Serial (COM4)	RS-232C, Connector: D-Sub9 (plug)
Ethernet (LAN1)	IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T, Connector: Modular jack (RJ-45) x 1
Ethernet (LAN2)	IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
USB (TYPE-A)	Conforms to USB2.0 (TYPE-A) x 5, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
Video	DVI-I OUT, Connector: DVI-I 29 pin (socket) X 1*4
RAS	Input (external reset input possible): 2 points, Output 2 points, Rated Voltage: DC 12 V, Maximum Rated Current: 100 mA, Connector: D-Sub9 (socket) x 1
Sound	Speaker output, connector: mini-pin jack
CD/DVD-ROM Drive	DVD-ROM Drive/DVD Multi Drive (option)

1About the differences in a CCFL model and a LED model.

2Available memory region is around 3.5GB.

3Depending on the operating temperature and age of unit, the clock can deviate ±300 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

4･ When the dual output with the front module is selected, the DVI-I can be connected to an analog RGB monitor only., ･ When connecting the Pro-face FP3000 Series to the PL-3000B Series, use the Pro-face DVI-D cable (10m) FP-DV01-100.

General Specifications

International Safety Standards
Rated Input Voltage	AC 100 to 240V
Input Voltage Limits	AC 85 to 264V
Rated Frequency	50/60 Hz
Rated Frequency Range	47 to 63 Hz
Allowable Voltage Drop	1 cycle or less(Voltage drop interval must be 1 second or more.)
Power Consumption	145 VA or less
In-Rush Current	40 A or less
Voltage Endurance	AC 1,500 V 20 mA for 1 min (between charging and FG terminals)
Insulation Resistance	DC 500 V, 10 MΩ or more (between charging and FG terminals)
Weight Approx.	2 slot type: 12 kg [26.4 lb] or less (display unit only), 4 slot type: 13 kg [28.6 lb] or less (display unit only)
External Dimensions	2 slot type: W425 x H325 x D166 mm [W16.73 x H12.8 x D6.54 in.], 4 slot type: W425 x H325 x D218 mm [W16.73 x H12.8 x D8.58 in.]
Panel Cut Dimensions	W383.5 x H282.5 mm [W15.1 x H11.12 in.], Panel thickness area: 1.6 to 10 mm [0.06 to 0.39 in.]*8

55 to 45 ℃ during DVD data writing or with a battery.

6The Vibration Resistance is 1.96m/s² during DVD drive unit's read/write running.

7The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the GP and separate protection measures are suggested., Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the GP be sure to confirm the type of conditions that will be present in the GP's operating environment., If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

8Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.].