Màn hình Proface PFXSP5660TPD



12 tháng

Family HMI Series SP5000 Series Size 12" Model PFXSP5660TPD Global Code PFXSP5660TPD Product Features 12" DC Wireless LAN Auto Scaling Brightness Sensor (Premium Display) Repair Status ✔ (Repair service is available, reparable.)

Standard product information
SP5000 Series
Global Code 
Product Features 
12" DC Wireless LAN Auto Scaling Brightness Sensor (Premium Display)
Repair Status 
✔ (Repair service is available, reparable.)
Display specifications
Display type 
Display size 
1,024 x 768 pixels (XGA)
Auto scaling 
Effective display area 
W245.76 x H184.32 mm [W9.68 x H7.26 in.]
Display colors 
16 million Colors*1
White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 
0 to 100 (Adjusted with touch panel or software)
Brightness sensor 
Touch panel type 
Resistive Film (analog, multi-touch)
Touch panel resolution 
1,024 x 1,024
Touchpanel lifetime 
1,000,000 times or more

1For details about Display Colors, refer to the manual for your screen editing software.

Electrical specifications
Rated input voltage 
12 to 24 Vdc
Input voltage limits 
10.8 to 28.8 Vdc
Allowable voltage drop 
12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power consumption 
Max. 23 W
Power is not supplied to external devices: 20 W or less
Backlight adjusted (20%): 13 W or less
Backlight OFF (Stand-by mode): 8 W or less*2
In-rush current 
30 A or less
Voltage endurance 
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance 
500 Vdc, 10 MΩ or more

2Power consumption for Display Module only

Environmental specifications
International safety standards 
Surrounding air temperature 
0 to 60 °C [32 to 140 °F]
Storage temperature 
-20 to +60 °C [-4 to 140 °F]
Ambient humidity 
10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity 
10 to 90 % RH (Wet bulb temperature : 39 °C [102.2 °F] max. - no condensation)
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree 
For use in Pollution Degree 2 environment
Corrosive gases 
Free of corrosive gases
Air pressure (altitude range) 
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance 
IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration : 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion resistance 
IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Noise immunity 
Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)
Electrostatic discharge immunity 
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Interface specifications
USB (Type A) 
Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA
Communication distance: 5 m [16.4 ft.]*3
USB (mini-B) 
Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less

3When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one barcode reader.
If you connect multiple devices that are the same type, only the first device will work.

Frequency bandwidth 
2.4 GHz
Channel bandwidth 
20 MHz
Access Point mode: 1 to 11 ch Client mode: North America US: 1 to 11 ch Japan JP: 1 to 13 ch Europe EU: 1 to 13 ch Korea KR: 1 to 13 ch China CN: 1 to 13 ch Taiwan TW: 1 to 11 ch*5
Transmission speed 
IEEE802.11b: max 11 Mbps
IEEE802.11g: max 54 Mbps
IEEE802.11n: max 72.2 Mbps
Transmission distance 
The maximum 30 meters. (Distant varies depending on application software or use environment.)
Action mode 
Client mode / Access Point mode
Communication mode 
Network authentication 
Open, WPA-Personal, WPA2-Personal
Data encryption 
WEP (128 bit) (Open) AUTO/TKIP (WPA-Personal) AES (WPA2-Personal)*6
Maximum client connections 
Connection angle and distance 
Only the display side is connectable. The enabled connectivity angle and distance depend on your operating environment, applications to be used, and a communication target device. Be sure to conduct operation check including directionality in your operating environment before use.

4For the Wireless LAN, please use in a combination with the Open Box module. Do not use wireless communication to control machinery. Wireless communication system design must take into account the possibility of communication interference.

5In Access Point mode, IEEE802.11d is not supported. 
In Client mode, if the surrounding access points do not support IEEE802.11d, channels are limited from 1 to 11 ch.

6In Access Point mode, WEP is not supported.

Structural specifications
Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).
Cooling method 
Natural air circulation
When using a factory-installed front USB cover: IP65F, IP67F.
When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13
* The front face of this product when properly installed in an enclosure and not using the front panel USB port.
NOTE: The option is a front USB cover with screw manufactured by Pro-face (Model Number PFXZCDCVUS1).*7
External dimensions 
W315 x H241 x D67 mm [W12.4 x H9.49 x D2.64 in.]
Panel cut-out dimensions 
W301.5 x H227.5 mm [W11.87 x H8.96 in.]
Panel thickness area: 1.6 to 5 mm [0.06 to 0.2 in.]*8
3.2 kg [7.06 lb] or less*9

7The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.

8Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

9Display module only.

External dimensions 

Display module and box module combination




Panel cut-out dimensions 



Bình luận

Sản phẩm cùng loại

Màn hình PFXSP5800WCD Call

Màn hình PFXSP5800WCD

Hotline: 0946.733.151
Màn hình Proface PFXSP5700TPD Call

Màn hình Proface PFXSP5700TPD

Hotline: 0946.733.151
Màn hình Proface PFXSP5600WAD Call

Màn hình Proface PFXSP5600WAD

Hotline: 0946.733.151
PFXSP5B41 Call


Hotline: 0946.733.151
Màn hình Proface PFXSP5500WAD Call

Màn hình Proface PFXSP5500WAD

Hotline: 0946.733.151
Màn hình Proface PFXSP5600TPD Call

Màn hình Proface PFXSP5600TPD

Hotline: 0946.733.151


Hotline: 0946.733.151
Màn hình Proface PFXSP5B40 Call

Màn hình Proface PFXSP5B40

Hotline: 0946.733.151
Màn hình Proface PFXSP5400WAD Call

Màn hình Proface PFXSP5400WAD

Hotline: 0946.733.151
Màn hình Proface PFXSP5B10 Call

Màn hình Proface PFXSP5B10

Hotline: 0946.733.151
Màn hình Proface PFXSP5500TPD Call

Màn hình Proface PFXSP5500TPD

Hotline: 0946.733.151

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

MR. Bình

MR. Bình - 0903.733.151

Liên kết website

Thống kê

  • Đang online 65
  • Hôm nay 509
  • Hôm qua 1,205
  • Trong tuần 509
  • Trong tháng 19,250
  • Tổng cộng 1,537,894