Model No. List for Customized Model

Product Name Front Color Front USB Model
Non-Coated Coated

SP-5500TP

Manual

Silver Available - PFXSP5500TPDF0C
Black PFXSP5500TPDF1 PFXSP5500TPDF1C
Off-white PFXSP5500TPDF2 PFXSP5500TPDF2C
Beige PFXSP5500TPDF3 PFXSP5500TPDF3C
Silver *1 Tamper Resistant *1 PFXSP5500TPDF5 PFXSP5500TPDF5C
Black *1 PFXSP5500TPDF6 PFXSP5500TPDF6C
Off-white *1 PFXSP5500TPDF7 PFXSP5500TPDF7C
Beige *1 PFXSP5500TPDF8 PFXSP5500TPDF8C
SP-5B40 - - - PFXSP5B40F0C

Display Specifications

Display Type TFT Color LCD
Display Size 10.4”
Resolution 800 x 600 pixels (SVGA)
Auto Scaling Yes
Effective Display Area W211.2 x H158.4 mm (W8.31 x H6.24 in.)
Display Colors 16 million colors
For details about Display Colors, refer to the manual for your screen editing software.
Backlight White LED
(Not user replaceable. When replacement is required, contact your local distributor.)
Backlight Service Life 50,000 hours or more (continuos operation at 25 °C [77 °F]
before backlight brightness decreases to 50%
Brightness Control 0 to 100 (Adjusted with touch panel or software)
Brightness Sensor Yes
Touch
Panel
Type Resistive Film (analog, multi-touch)
Resolution 1,024 x 1,024
Service Life 1 million times or more
 

Electrical Specifications

Power
Supply
Rated Input Voltage 12 to 24 Vdc
Input Voltage Limits I10.8 to 28.8 Vdc
Voltage Drop 12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power Consumption
(Primary Power Supply
[including power loss])
Max. 50 W
In-Rush Current 30 A or less
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)
 

Memory

Application Memory

Screen Size: 64MB *CFast card

Free Space: About 5GB *2
Backup Memory NVRAM 320 KB
 

Interface Specifications (Display)

USB
(Type A)
Interface
*3
Connector USB 2.0 (Type A) x 1
Power Supply
Voltage
5 Vdc ±5%
Maximum Current
Supplied
500 mA
Maximum Transmission
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface
*3
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)
 

Interface Specifications (Box Module)

Serial
Interface
COM1
Asynchronous
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400 (1,200) to 115,200 bps
Connector D-Sub 9 pin (plug)
Serial
Interface
COM2
Asynchronous
Transmission
RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission
Speed
2,400 (1,200) to 115,200 bps
Connector D-Sub 9 pin (plug)
USB
(Type A)
Interface
Connector USB 2.0 (Type A) x 3
Power Supply
Voltage
5 Vdc ±5%
Maximum Current
Supplied
500 mA/port,
1 A total for 3 ports
Maximum Transmission
Distance
5 m (16.4 ft)
USB
(mini-B)
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)
Ethernet
Interface
Standard IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T
Connector Modular jack (RJ-45) x 2
SD Card
Interface
SD Card SD Card Slot (Storage) x 1
CFast Card
Interface
CFast Card CFast Card Slot (System) x 1
CFast Card Slot (Storage) x 1
Expansion Unit
Interface
Expansion Unit Fieldbus Unit x 1
Video
Interface
DVI-D DVI-D OUT
Connector DVI-D 24 pin (socket) x 1
Sound Input
Interface
Sound Input MIC or LINE input (software switch)
Connector MINI-JACK ∅3.5 x 1
Sound Output
Interface
Speaker Output 300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz)
LINE Output Rated load: 10 kΩ or more
Connector 2-piece terminal block (AUX) x 1
AUX Output
Interface
AUX Output Alarm Output/Buzzer Output
Rated Voltage 24 Vdc
Rated Current 50 mA or less
Connector 2-piece terminal block (AUX) x 1
 

Structural Specifications

Grounding Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire,
or your country’s applicable standard (same for FG and SG terminals).
Cooling Method Natural air circulation
Structure *4 When using a factory-installed front USB cover: IP65F, IP67F.
When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13
* The front face of this product when properly installed in an enclosure and
not using the front panel USB port.
NOTE: The option is a front USB cover with screw manufactured by Pro-face
 (Model Number PFXZCDCVUS1).
External
Dimensions(Display)
W272.5 x H214.5 x D67 mm (W10.73 x H8.44 x D2.64 in.)
External
Dimensions(Box Module)
W188 x H131 x D45 mm (W7.4 x H5.16 x D1.77 in.)
Panel Cut
Dimensions
W259 x H201 mm (W10.2 x H7.91 in.) *5
Panel thickness area:1.6 to 5 mm (0.06 to 0.2 in.) *6
Weight *7 3.6 kg (7.88 lb) or less
 

External Dimensions

Display

Box Module

Display module and box module combination

Panel Cut-out Dimensions

Model Name A B C
SP-5500TP 259 (+1/-0)
[10.2 (+0.04/-0)]
201 (+1/-0)
[7.91 (+0.04/-0)]
1.6 to 5 mm
(0.06 to 0.2 in.)
 

External Dimensions with cables


(Image of Open Box)
*1 Rotation area of the fastener
*2 Pitch of center of installation fastener screws
 
  1. *1 To hide front USB cover with overlay prevents from using a USB interface.
  2. *2 You can install the applications you have used. As for hardware specifications, the CPU is Intel® AtomTM E6x0 1.3GHz (Single core/Dual thread)' and the main memory is 'DDR2 SDRAM 2GB'. For the other hardware specifications, refer to "SP5000 Series Open Box Reference Manual".
  3. *3 When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one bar code reader. If you connect multiple devices that are the same type, only the first device will work.
  4. *4 The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
  5. *5 For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)
  6. *6 Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.
  7. *7 The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules.