Màn hình PFXSP5800WCD

PFXSP5800WCD

Proface

12 tháng

Display type TFT Color LCD Display size 19" Wide Resolution 1,366 x 768 pixels (FWXGA) Auto scaling Equipped Effective display area W409.8 x H230.4 mm [W16.13 x H9.07 in.]

Family 
HMI
Series 
SP5000 Series
Size 
19" Wide
Model 
PFXSP5800WCD
Global Code 
PFXSP5800WCD
Product Features 
19" Wide DC Auto Scaling Brightness Sensor (Premium Display)
Repair Status 
✔ (Repair service is available, reparable.)
Display specifications
Display type 
TFT Color LCD
Display size 
19" Wide
Resolution 
1,366 x 768 pixels (FWXGA)
Auto scaling 
Equipped
Effective display area 
W409.8 x H230.4 mm [W16.13 x H9.07 in.]
Display colors 
16 million colors
Backlight 
White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 
0 to 100 (Adjusted with touch panel or software)
Brightness sensor 
Equipped
Touch panel type 
Projected Capacitive (5 simultaneous touch)
Touch panel resolution 
2,048 x 2,048
Touchpanel lifetime 
50,000,000 times or more
Electrical specifications
Rated input voltage 
12 to 24 Vdc
Input voltage limits 
10.8 to 28.8 Vdc
Allowable voltage drop 
12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power consumption 
Max. 19W
Power is not supplied to external devices: 16 W or less
Backlight adjusted (20%): 9 W or less
Backlight OFF (Stand-by mode): 8 W or less*1
In-rush current 
30 A or less
Voltage endurance 
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance 
500 Vdc, 10 MΩ or more

1Power consumption for Display Module only

Environmental specifications
International safety standards 
ce.gifctick.gifeac.gifkc.gifdnv_gl.giful61010.giful61010ansi.gif
Surrounding air temperature 
0 to 55 °C [32 to 131 °F]
Storage temperature 
-20 to +60 °C [-4 to 140 °F]
Ambient humidity 
10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity 
10 to 90 % RH (Wet bulb temperature : 39 °C [102.2 °F] max. - no condensation)
Dust 
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree 
For use in Pollution Degree 2 environment
Corrosive gases 
Free of corrosive gases
Air pressure (altitude range) 
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance 
IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion resistance 
IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Noise immunity 
Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)
Electrostatic discharge immunity 
Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)
Interface specifications
USB (Type A) 
Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA
Communication distance: 5 m [16.4 ft.]*2
USB (mini-B) 
Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft]

2When using the Display Module with the Power Box, you can connect only one of each type of USB device, such as one USB flash drive, one transfer cable, or one barcode reader. If you connect multiple devices that are the same type, only the first device will work.

Structural specifications
Grounding 
Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals).
Cooling method 
Natural air circulation
Structure 
When using a factory-installed front USB cover: IP65F, IP67F, Type 1
When using a front USB cover as an option: IP66F, IP67F, Type 1, Type 4X (Indoor Use Only)/13
NOTE: The option is a front USB cover with screw manufactured by Pro-face (Model Number PFXZCDCVUS1).*3
External dimensions 
W483 x H337 x D69 mm [W19.01 x H13.26 x D2.71 in.]
Panel cut-out dimensions 
W465 x H319 mm [W18.30 x H12.55 in.]*4
Weight 
6.8 kg [14.99 lb] or less*5

3The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the GP and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the GP unit, be sure to confirm the type of conditions that will be present in the GP's operating environment. If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, be sure to replace the installation gasket regularly.

4Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

5Display module only.

Dimensions
External dimensions 

Display module and box module combination

Panel cut-out dimensions 

 

sp5000_panelcut.gif

 

A B C
465 mm (+1/-0 mm)
18.31 in. [+0.04/-0 in.]
319 mm (+1/-0 mm)
12.56 in. [+0.04/-0 in.]
1.6 to 5 mm
[0.06 to 0.2] in.
External dimensions with cable 

(Image of Open Box)

*1Rotation area of the fastener

*2Pitch of center of installation fastener screws

Bình luận

Sản phẩm cùng loại

Màn hình Proface PFXSP5600TPD Call

Màn hình Proface PFXSP5600TPD

Hotline: 0946.733.151
Màn hình Proface PFXSP5B10 Call

Màn hình Proface PFXSP5B10

Hotline: 0946.733.151
Màn hình Proface PFXSP5660TPD Call

Màn hình Proface PFXSP5660TPD

Hotline: 0946.733.151
Màn hình Proface PFXSP5500WAD Call

Màn hình Proface PFXSP5500WAD

Hotline: 0946.733.151
Màn hình Proface PFXSP5400WAD Call

Màn hình Proface PFXSP5400WAD

Hotline: 0946.733.151
Màn hình Proface PFXSP5B40 Call

Màn hình Proface PFXSP5B40

Hotline: 0946.733.151
PFXSP5700WCD Call

PFXSP5700WCD

Hotline: 0946.733.151
Màn hình Proface PFXSP5700TPD Call

Màn hình Proface PFXSP5700TPD

Hotline: 0946.733.151
Màn hình Proface PFXSP5600WAD Call

Màn hình Proface PFXSP5600WAD

Hotline: 0946.733.151
PFXSP5B41 Call

PFXSP5B41

Hotline: 0946.733.151
Màn hình Proface PFXSP5500TPD Call

Màn hình Proface PFXSP5500TPD

Hotline: 0946.733.151

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

MR. Bình

MR. Bình - 0903.733.151

Liên kết website

Thống kê

  • Đang online 49
  • Hôm nay 829
  • Hôm qua 3,456
  • Trong tuần 6,830
  • Trong tháng 33,231
  • Tổng cộng 1,343,137

Top

   (0)