Cảm Biến Quang Điện Banner VS4

Banner VS4

Banner(USA)

12 Tháng

Công Ty TNHH Kỹ Thuật Điện Hiệp Lực Mr Bình:TEL:0905 496 424- 0903 743 151 Email: dhl.sale04@gmail.com Skype: dhl.sale04 YaHoo: thanhbinh850036

Supply Voltage and Current 10 to 30V dc (10% max. ripple) Emitter:25 mA
Receiver:25 mA (exclusive of load)
Range 1.0 m
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration SPST solid-state switch:NPN (current sinking) or PNP (current sourcing), depending on model. Light operate (LO) or dark operate (DO), depending on model
Output Rating 50 mA max. OFF-state leakage current:less than 1 µA @ 24V dc
ON-state saturation voltage:less than 0.25V @ 10 mA dc; less than 0.5V @ 50 mA dc
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs; Overload trip point greater than or equal to 100 mA
Output Response Time 1 millisecond ON; 0.5 milliseconds OFF
Delay at Power-up 100 milliseconds max.; outputs do not conduct during this time.
Repeatability 100 microseconds
Indicators 2 LED Indicators:Green and Yellow
Green ON steady:power to sensor is ON
Green flashing:output overload
Yellow ON steady:light is sensed
Yellow flashing:marginal excess gain (1-1.5x) in light condition
Construction Low pressure molded thermoplastic housing (UL 94-VO) with polycarbonate mounting holes and lens
Environmental Rating IP67; NEMA 6
Connections 2 m or 9 m attached PVC cable, or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-20° to +55° C
Relative humidity:80% @ 50° C (non-condensing)
Vibration and Mechanical Shock Vibration:All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak
Shock:All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, half-sine wave pulse shape
Application Notes M2 stainless-steel mounting hardware is included with each sensor. Optional mounting brackets are available.

Bình luận

Sản phẩm cùng loại

Cảm Biến Quang Điện Banner S12-2 Call
Cảm Biến Quang Điện Banner Q08 Call
Cảm Biến Quang Điện Banner VS3 Call
Cảm Biến Quang Điện Banner VS1 Call

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

MR. Bình

MR. Bình - 0903.733.151

Liên kết website

Thống kê

  • Đang online 28
  • Hôm nay 171
  • Hôm qua 862
  • Trong tuần 1,033
  • Trong tháng 20,878
  • Tổng cộng 1,188,159

Top

   (0)