Cảm Biến Quang Điện Banner VS3

(1 đánh giá)

Banner VS3


12 Tháng

Công Ty TNHH Kỹ Thuật Điện Hiệp Lực Mr Ngoan - 0903.398.248 - 0982.977.430 – 0903.001.181 Email: proface.hlc.sales1@gmail.com Skype: proface.hlc.sales1 YH: duongthengoandhl

Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 25 mA (exclusive of load)
Range Opposed:1.2 m
Non-polarized Retroreflective:250 m, range is specified using one model BRT-32X20AM retroreflector
Polarized Retroreflective:250 m, range is specified using one model BRT-32X20AM retroreflector
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration SPST solid-state switch:NPN (current sinking) or PNP (current sourcing), depending on model. Light operate (LO) or dark operate (DO), depending on model
Output Rating 50 mA max. OFF-state leakage current:less than 1 µA @ 24V dc
ON-state saturation voltage:less than 0.25V @ 10 mA dc; less than 0.5V @ 50 mA dc
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs; Overload trip point greater than or equal to 100 mA
Output Response Time Opposed:1 millisecond ON; 0.5 millisecond OFF
Non-polarized and Polarized Retroreflective:1 millisecond ON/OFF
Delay at Power-up Opposed:100 milliseconds max.; outputs do not conduct during this time.
Non-polarized and Polarized Retroreflective:150 milliseconds max.; outputs do not conduct during this time.
Repeatability Opposed:100 microseconds
Non-polarized and Polarized Retroreflective:160 microseconds
Indicators 2 LED Indicators:Green and Yellow
Green ON steady:power to sensor is ON
Green flashing:output overload
Yellow ON steady:light is sensed
Yellow flashing:marginal excess gain (1-1.5x) in light condition
Construction Opposed and Non-polarized Retroreflective:Black ABS housing with clear acrylic lens
Polarized Retroreflective:Black ABS housing with glass lens and acrylic cover
Environmental Rating IEC IP67; NEMA 6
Connections 2 m or 9 m attached PVC cable, or threaded 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-20 to +55° C
Relative humidity:80% @ 50° C (non-condensing)
Vibration and Mechanical Shock Vibration:All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak
Shock:All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, half-sine wave pulse shape
Application Notes M3 stainless-steel mounting hardware is included with each sensor. Optional mounting brackets are available.

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

MR. Bình

MR. Bình - 0903.733.151

Liên kết website

Thống kê

  • Đang online 26
  • Hôm nay 941
  • Hôm qua 1,091
  • Trong tuần 2,032
  • Trong tháng 21,843
  • Tổng cộng 1,709,331