Cảm Biến Quang Điện Banner VS1

Banner VS1

Banner(USA)

12 Tháng

Công Ty TNHH Kỹ Thuật Điện Hiệp Lực Mr Bình:TEL:0905 496 424- 0903 743 151 Email: dhl.sale04@gmail.com Skype: dhl.sale04 YaHoo: thanhbinh850036

Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 25 mA (exclusive of load)
Range Convergent:10 or 20 mm, depending on models
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration SPST solid-state switch:NPN (current sinking) or PNP (current sourcing), depending on model. Light operate (LO) or dark operate (DO), depending on model
Output Rating 50 mA max. OFF-state leakage current:less than 1 µA @ 24V dc
ON-state saturation voltage:less than 0.25V @ 10 mA dc; less than 0.5V @ 50 mA dc
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs; Overload trip point greater than or equal to 100 mA
Output Response Time 1 millisecond ON/OFF
Repeatability 250 microseconds
Indicators 2 LED Indicators:Green and Yellow
Green ON steady:power to sensor is ON
Green flashing:output overload
Yellow ON steady:light is sensed
Yellow flashing:marginal excess gain (1-1.5x) in light condition
Construction Black ABS/polycarbonate housing with clear acrylic lens
Environmental Rating IP54; NEMA 3
Connections 2 m or 9 m attached PVC cable, or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-20° to +55° C
Relative humidity:80% @ 50° C (non-condensing)
Application Notes M2 stainless-steel mounting hardware is included with each sensor. Optional mounting brackets are available.

Bình luận

Sản phẩm cùng loại

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

Thống kê

  • Đang online 77
  • Hôm nay 180
  • Hôm qua 620
  • Trong tuần 6,207
  • Trong tháng 15,114
  • Tổng cộng 893,102

Top

   (0)