Cảm Biến Quang Điện Banner T8

(1 đánh giá)

Banner T8


12 Tháng

Công Ty TNHH Kỹ Thuật Điện Hiệp Lực Mr Bình:TEL:0905 496 424- 0903 743 151 Email: dhl.sale04@gmail.com Skype: dhl.sale04 YaHoo: thanhbinh850036

Supply Voltage and Current 10 to 30V dc (10% max. ripple) @ less than 25 mA (exclusive of load)
Range Opposed:2.0 m
Diffuse (long range):100 mm
Diffuse (short range):50 mm
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration SPST solid-state switch:NPN (current sinking) or PNP (current sourcing), depending on model. Light operate (LO) or dark operate (DO), depending on model
Output Rating 50 mA max. OFF-state leakage current:less than 1 µA @ 24V dc
ON-state saturation voltage:less than 0.25V @ 10 mA dc; less than 0.5V @ 50 mA dc
Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs; Overload trip point greater than or equal to 100 mA
Output Response Time 1 millisecond ON; 0.5 milliseconds OFF
Delay at Power-up Opposed:100 milliseconds max.; outputs do not conduct during this time.
Diffuse:150 milliseconds max.; outputs do not conduct during this time.
Repeatability Opposed:100 microseconds
Diffuse:160 microseconds
Indicators Receiver, 2 LED Indicators:Green and Red
Emitter, 1 LED Indicator:Green
Green ON steady:power to sensor is ON
Green flashing:output overload
Red ON steady:light is sensed
Red flashing:marginal excess gain (1-1.5x) in light condition
Diffuse, 1 LED Indicator:Red
Red ON steady:light is sensed
Construction Reinforced polycarbonate/ABS alloy housing with acrylic window
Environmental Rating IEC IP67; NEMA 6
Connections 2 m or 9 m attached PVC cable, or 150 mm pigtail with threaded 3-pin Pico-style quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions Temperature:-10 to +50° C
Relative humidity:80% @ 50° C (non-condensing)
Vibration and Mechanical Shock Vibration:All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak
Shock:All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, half-sine wave pulse shape
Application Notes One reinforced polycarbonte/ABS alloy 8 mm threaded nut is included with each sensor. Optional mounting bracket is available.

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

Sản Phẩm Giảm Giá

Hổ trợ trực tuyến

Hotline: Mr Duy

Hotline: Mr Duy - 0946.733.151

MR. Bình

MR. Bình - 0903.733.151

Liên kết website

Thống kê

  • Đang online 31
  • Hôm nay 244
  • Hôm qua 1,086
  • Trong tuần 1,330
  • Trong tháng 36,144
  • Tổng cộng 1,870,658